Airsoft Canada - View Single Post

DAVE 666 · April 30th, 2007, 20:16

can any of you fellow gun fanatics help me out. i'm having serious difficulty trying to strip down my Toyko Mauri SD5. i've unscrewed/un-bolted everything there is, but i still cant seperate the piston housing (-the top reciever?) from the bottom half of the gun (-the trigger assembly and motor etc).
i know on a standard MP5 you only have take out one bolt (near the mag' release clip lever) and the two halfs pull apart...

'will be well gratefull to whoever can shed some light on the matter...

April 30th, 2007, 20:16	#1
DAVE 666 Trader rating Join Date: Apr 2007	STRIPPING THE 'TM' SD5 can any of you fellow gun fanatics help me out. i'm having serious difficulty trying to strip down my Toyko Mauri SD5. i've unscrewed/un-bolted everything there is, but i still cant seperate the piston housing (-the top reciever?) from the bottom half of the gun (-the trigger assembly and motor etc). i know on a standard MP5 you only have take out one bolt (near the mag' release clip lever) and the two halfs pull apart... 'will be well gratefull to whoever can shed some light on the matter...