Airsoft Canada - View Single Post

mcguyver · May 3rd, 2007, 09:04

You can fit an SPR RAS, but the outer barrel for an AEG has far too small an inner diameter to fit a PTW inner barrel. You could use a 20" PTW barrel, get a real steel gas block from Armalite, GG&G, or whoever, but the SPR flashider (real or airsoft) would need to be drilled out to accomodate the PTW inner barrel.

I have a Metal Tech M16-length RAS on my M16A3, and with the replacement of the front sight tower with a gas block and an SPR flashider is all I'd need to give it the SPR look.

And Wey, go to a gun shop like TSE and ask for a stripped AR upper. They will know what you are talking about. You should pay about $200 and will get just the upper, no bolt carrier, barrel, barrel nut or carry handle. Alot of guys sell complete uppers with barrel, etc for about $600-$800.

May 3rd, 2007, 09:04	#45
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	You can fit an SPR RAS, but the outer barrel for an AEG has far too small an inner diameter to fit a PTW inner barrel. You could use a 20" PTW barrel, get a real steel gas block from Armalite, GG&G, or whoever, but the SPR flashider (real or airsoft) would need to be drilled out to accomodate the PTW inner barrel. I have a Metal Tech M16-length RAS on my M16A3, and with the replacement of the front sight tower with a gas block and an SPR flashider is all I'd need to give it the SPR look. And Wey, go to a gun shop like TSE and ask for a stripped AR upper. They will know what you are talking about. You should pay about $200 and will get just the upper, no bolt carrier, barrel, barrel nut or carry handle. Alot of guys sell complete uppers with barrel, etc for about $600-$800. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.