Quote:
Originally Posted by Jayhad
really? I have only cut 2 barrels with mine and never an issue, not saying it is impossible. I actually think you would get a burr in the inside just due to the way tubing cutters cut
|
Really depends on how much pressure the screw is set for when doing it. A bit of pressure, gradually produces the least amount of inside burr (easily cleaned up with an Xacto knife like Max said), but some people put too much cut per turn of the cutter, in some cases can reduce the inner diamter of the tube (copper pipe or brass barrel) by 0.5mm or more at the end.