|
With TM lowcaps, filling full will cause them to only work in full auto, at least for a burst. Semi won't always work right off the bat. So fill your mag, fire a burst then switch to semi.
Other things is you are lacking maintainance. I'd say that is the #1 cause of your misfeeding. Buy some silicon oil, put your unloaded gun upside down, put two drops of oil right in the loading tube, then dry fire a half dozen times. Your gun should perform well for a few thousand shots afterwards.
Or it could be your mags need a lube. Fill one mag with BBs, put a few drops of oil on the top BB and tap the bottom of it t make the oil settle. Unload those BBs, then reload the SAME BBs, then pop them out again. Use those same BBs (because they are covered in oil) for all the rest of your mags. Sometimes mags will need a lube to keep them feeding properly.
|