Airsoft Canada - View Single Post - Need Help: Fitting pressure switch into foregrip

Ilya_7 · July 17th, 2007, 00:52

I have a dilemma.

The pressure switch for my tac light is too wide to fit into the slot on the side of my foregrip, where I want it housed.

I have already pretty much ripped down the sides and its still just about a mm too thick. I was thinking about bending it into a slight 'V' shape, but was worried that that might make it too sensitive, or even hold it activated.

Any ideas would be helpful - except "get a new foregrip/pressure switch".

Cheers and Thanks

July 17th, 2007, 00:52	#1
Ilya_7 Trader rating Join Date: Jan 2006 Location: Thornhill	Need Help: Fitting pressure switch into foregrip I have a dilemma. The pressure switch for my tac light is too wide to fit into the slot on the side of my foregrip, where I want it housed. I have already pretty much ripped down the sides and its still just about a mm too thick. I was thinking about bending it into a slight 'V' shape, but was worried that that might make it too sensitive, or even hold it activated. Any ideas would be helpful - except "get a new foregrip/pressure switch". Cheers and Thanks __________________ Less QQ, More Pew Pew. My real name is Jon.