|
1) Manufacturer, Model Name (name of weapon on box, and weapon replicated if different from model name)
- KJW M92F Elite
2) Date Obtained
- January 2003
3) Initial Cost
- $100
4) New or Used
- Used
5) Mechanical Problems (Gearbox issues, hopup issues.. basically functional performance related -- supply date of issue)
- Broken trigger spring
6) Esthetic Problems (Paint damage, cracks in body, loose parts.. physical construction related -- supply date of issue)
- Slight wear around bottom of magazine and around back of trigger.
7) Rounds fired between failures (think how many bags of BB's used before it failed. If no failure, list rounds fired up to this point)
- Has not failed. Broken trigger return spring at approximately 200 shots.
8) Changes to Internals and Externals (upgrades, mods, dates)
- None
9) Resale Date and Value if applicable.
-
10)Notes and Comments (Optional)
- Great pistol, apparently the trigger spring is a very common broken part. Otherwise the pistol has been banged around and used as a field weapon for a long time. Pistol still functions without the trigger spring.
-------------------------------------------------------------------
1) Manufacturer, Model Name (name of weapon on box, and weapon replicated if different from model name)
- Tokyo Marui G3 SG1
2) Date Obtained
- June 2002
3) Initial Cost
- $650
4) New or Used
- Used
5) Mechanical Problems (Gearbox issues, hopup issues.. basically functional performance related -- supply date of issue)
- No performance issues.
6) Esthetic Problems (Paint damage, cracks in body, loose parts.. physical construction related -- supply date of issue)
- CA Metal body throughout. Cracked at the front near the front sight. Doest not affect gun performance and is solid due to placement of the front sling pin. Pin that holds onto the cocking leaver is fairly loosely set and can potentially fall out.
7) Rounds fired between failures (think how many bags of BB's used before it failed. If no failure, list rounds fired up to this point)
- Has not failed.
8) Changes to Internals and Externals (upgrades, mods, dates)
- Upgrades: 170% PDI Spring, CA Torque up gears, systema cylinder and piston approximately August 2002. Upgraded to Madbull PSG1 tight bore barrel and silencer to cover extended length May 2006.
9) Resale Date and Value if applicable.
-
10)Notes and Comments (Optional)
- I've owned this gun for a long time and is my primary weapon. Shooting just shy of 400FPS with upgraded internals it has seen approximately 40,000BB's fired without flaw. Pistol grip has very slight discoloration but is probably due to deet exposure over an extended period of time now.
|