Airsoft Canada - View Single Post

conrad13 · November 4th, 2007, 11:35

I've got a TM M4A1 with a guarder metal body and one piece hopup. It has been in that configuration for 2 + years now. Recently my mags have had trouble feeding. There seems to be to much up and down movement, at least a few milimetres. I have to hold the mag up in the magwell for it to feed properly. This happens with my TM & KA lowcaps and my CA & SRC highcaps. Now my SRC M16 with G&P metal hopup and metal body doesn't has this problem at all. I tried switching out the mag catch but it had no effect. I'm wondering if the hopup feed tube in the G&P unit is a little longer then the guarder one, but I don't think that would explain why the problem started just now.

November 4th, 2007, 11:35	#1
conrad13 Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	AR mags loose in magwell I've got a TM M4A1 with a guarder metal body and one piece hopup. It has been in that configuration for 2 + years now. Recently my mags have had trouble feeding. There seems to be to much up and down movement, at least a few milimetres. I have to hold the mag up in the magwell for it to feed properly. This happens with my TM & KA lowcaps and my CA & SRC highcaps. Now my SRC M16 with G&P metal hopup and metal body doesn't has this problem at all. I tried switching out the mag catch but it had no effect. I'm wondering if the hopup feed tube in the G&P unit is a little longer then the guarder one, but I don't think that would explain why the problem started just now. __________________ PETA: People for the Eating of Tasty Animals Last edited by conrad13; November 4th, 2007 at 18:35..