|
Well the good news is that I am getting good at taking this apart
and reassembling it.Here is something ,it works normal running it with
the mechbox and motor,then I place it in the upper bodyusing the
rear lock pin secure it for my next test.Next I hold the loaded mag
in position and you hear the round load into the chamber,on semi I
pull the trigger and it sounds good put no rounds come out,I pull
the trigger again and you can hear a grind noise,I take the box out
and the tappet and nozzle are compressed to the rear but the piston
is ahead.Now I have checked the shims and the movement of all parts.
PLEASE HELP LOL , what causes this to get messed up?.
|