[r0de0]

Howdy y’all,
and thanks for your prompt replies…

Having a chance to re-read your replies, I must correct my observations and my typo, I meant to say that I got off 30 shots, single action.

I had, at around shot #15, tried a multiple burst of about 3 shots. Very impressive as were the single shots.

It was very accurate at 30 feet as I pinged off a 2 inch plastic toy off a shelf, and the plastic pellets would go through a double layer of corrugated cardboard at about 20 feet.

So, accuracy and performance were not an issue.

It was around the 30th shot that the trigger had some resistance to it and would ‘click’ when pulled. I pulled it maybe 3 or four times before I took the gun apart, tried recharging the battery, tried in multiple burst and single shot mode, and the trigger freed up, but it no longer functions at all. When you now pull the trigger, no click but nothing else happens either.

I have had a chance to research the Internet read up on this model and there is some discrepancy as to what gearset this has, most agree that it some form or modified form of model 3 or type 3

It sounds like I need to take it apart and check for the obvious items that you have described, (voltages etc.) as my brother has a few Airsoft guns, and I am the technical one in the family and would end up doing what ever repairs are within my means.

Which Airsoft repair DVD would you recommend for this particular model and are they available in Canada?

It looks like Volume one has a good tear down section and Volume two has the Hop-up section that this MP007 has, so look like good contenders.

Cheers from Collingwood,
Wyatt.