Quote:
Originally Posted by LaZeDoUt^Jr.
i just found that out. When i pull back the trigger that part #265 is stiff. when i push it forward it becomes loose. then if i pull the trigger it still does not release, but i can release the hammer manually. when i push that hammer release part the hammer comes forward about 1/4 of the way, then when i push the trigger it comes forward totally and the trigger becomes stuck in the pushed position. Then i pull the hammer back and start all over again  What is wrong with it? |
Basically, when the selector is in semi or full, part#265 always disengages. The hooked end you see at the rear of this part is what the selector assembly catches when the slide moves back into battery, thus releasing the safe on the hammer. That's why you basically must cock the gun when in semi or full, as simply just switching the selector off safe usually doesn't catch onto #265 and release the hammer to make the gun ready to fire.