Airsoft Canada - View Single Post - Systema PTW Broken Upper Receiver due to over-tight Barrel Nut

Raven · February 9th, 2008, 00:48

If i go with Vodnik's advice, you really need the armorers wrench AND the plastic vice stand for uppers to do a safe job on any uppers. the stand is not expensive and well worth it for PTW owners.... cause with that wrench, its quite easy to over torque!...of course you have to use caution when applying force...(usually i put my hand as far up the wrench as possible to avoid over stress)

Armorers Wrench

Plastic Vice Stand

i know this is late.. but for anyone else thiking of doing any kind of work!

hope this helps.

February 9th, 2008, 00:48	#35
Raven Trader rating Join Date: Dec 2001 Location: Montreal	If i go with Vodnik's advice, you really need the armorers wrench AND the plastic vice stand for uppers to do a safe job on any uppers. the stand is not expensive and well worth it for PTW owners.... cause with that wrench, its quite easy to over torque!...of course you have to use caution when applying force...(usually i put my hand as far up the wrench as possible to avoid over stress) Armorers Wrench Plastic Vice Stand i know this is late.. but for anyone else thiking of doing any kind of work! hope this helps. __________________ Raven, Team Bad Karma (01), PQAC Do not mistake activity with results!! Last edited by Raven; February 9th, 2008 at 00:51..