|
If you are adventurous (read:frustrated) you can do what I did - removed the front grip (upper & lower), & move the wiring, fuse & connector to what better suits your immediate needs.
I discovered the same problem straight out of the box, however, being Scottish & not one to back away from a problem, I immediately set about removing the upper & lower, snipped the little black zap straps holding the wiring in place & tried several different variations of where it would, might & wouldn't work for me, finally settling on the ANPEQ (Because the 9.6V rocks that little gun!).
Thus why I found it far easier to throw a ANPEQ on mine.
__________________
Quote:
Originally Posted by Danke
Quite the thread; seen the return of Savage Haggis and the end of an empire.
|
Last edited by Savage Haggis; February 20th, 2008 at 23:23..
|