[airborneboi69]

hey guys thnx last night i did some work i thought the gas was escaping from the base of the shell since i already blown that seal so i replaced it with rubberwashers from bathroom repair kits then discoverd that the gas was still escaping so i took the metal plug with the oring that holds the gas in the chamber held it plugged with my finger and attempted to fill to see if the seal was tight. the gas was escaping which i confirmed in a sink of water so i went into my kit of oring i purchased from zellers in the automotive section for 5$ replaced the oring on the valve and now the grenades hold gas almost like new just i feel like i cant get as much gas aa i used to get in before.