Airsoft Canada - View Single Post - Old Version ICS MP5 SD question

Flatlander · March 17th, 2008, 17:17

I broke open that G&P I talked about before (low FPS problem - most likely spring) to compare.

Axle Diam (G&P) = 3.01mm
Axle Diam (ICS) = 2.98mm

The tappet plates are virtually identical in measurements except that the 'tail' that attaches to the cam on the sector gear has a slightly different profile.

I can't check the bushing compatibility as the G&P is a 7mm and the ICS is a 6mm box.

EDIT: Looking at pics of selector plates online (G&P and Systema) they appear to be the same also. Also found a review on Arnies stating it was fully compatable with the other MP5's (he states's his is a version 3 with a turbo 2000 - I have no idea how to tell what 'version' it is).

March 17th, 2008, 17:17	#6
Flatlander Trader rating Join Date: Mar 2007 Location: Edmonton	I broke open that G&P I talked about before (low FPS problem - most likely spring) to compare. Axle Diam (G&P) = 3.01mm Axle Diam (ICS) = 2.98mm The tappet plates are virtually identical in measurements except that the 'tail' that attaches to the cam on the sector gear has a slightly different profile. I can't check the bushing compatibility as the G&P is a 7mm and the ICS is a 6mm box. EDIT: Looking at pics of selector plates online (G&P and Systema) they appear to be the same also. Also found a review on Arnies stating it was fully compatable with the other MP5's (he states's his is a version 3 with a turbo 2000 - I have no idea how to tell what 'version' it is). __________________ Ronin 49 Team Member Last edited by Flatlander; March 17th, 2008 at 17:29..