Airsoft Canada - View Single Post - PSG-1 aluminum piston?

Apoc_ · April 9th, 2008, 15:56

On a side note regarding voltage and PSG-1: With the 200% spring and a 10.8v custom battery, my PSG-1 would fire two round bursts. The innards were spinning so fast, the piston would fail to catch at the end of the cycle and fire a 2nd time. Next trigger pull would result in just cranking the piston back to firing position. So, 1st trigger pull = 1.5 cycles, 2nd pull = .5 cycle. It was fun, but we decided to remove the extra cells and now all is well with 8.4v. Just something to be aware of if you go with a custom battery.

April 9th, 2008, 15:56	#16
Apoc_ Eagle Eye Trader rating Join Date: May 2007 Location: Winnipeg MB	G'day, On a side note regarding voltage and PSG-1: With the 200% spring and a 10.8v custom battery, my PSG-1 would fire two round bursts. The innards were spinning so fast, the piston would fail to catch at the end of the cycle and fire a 2nd time. Next trigger pull would result in just cranking the piston back to firing position. So, 1st trigger pull = 1.5 cycles, 2nd pull = .5 cycle. It was fun, but we decided to remove the extra cells and now all is well with 8.4v. Just something to be aware of if you go with a custom battery. __________________ Offense cannot be given, only taken. APOCALYPSE - TEAM HELLFISH