Quote:
Originally Posted by Apoc_
The gears that came in the FTK. and yep, that's exactly what was happening.
|
I never ran the 200% setup with a battery past 8.4v before, so I wasn't aware that would happen. I just knew that 200% springs with the infinity torque up gears that come with the FTK would be overkill, and extra voltage wouldn't be required.
The 200% spring should be at the strength level where you could almost get away with running standard ratio gears.
Quote:
Originally Posted by DSFD506
I actually love the PSG1 and thus the reason I bought this long ago. I've already upgraded the gears, air nozzle, 180% spring and the old Systema torque up motor for 402fps. I'd just like a little more out of it. I'm not looking for crazy fps just something around the 500 to 550 level. As far as the battery goes, I hooked up my 10.8v from my M4 to it and sometimes it had trouble compressing the spring. My 9.6v will not compress the spring at all.
|
If you're going to push the velocity up that high, I highly recommend you installing a MOSFET. If you don't, you're going to burn holes in to your switch assembly due to the huge electrical arcing that occurs with current draw that large.
Once you burn out your switch contacts... good luck getting a replacement. :P