Airsoft Canada - View Single Post

Colin_S · April 13th, 2008, 10:10

Heh well this is a first for me and I thought I'd share. Was going to install a set of torque up gears into a friend's TM MP5K when I found this "gem". A clean break (at least on one side) like what you get with version 2 mechboxes...

Well I guess that's what you get when you're running a PDI 170% spring and an aluminum piston head... I have a similar setup in my MP5K so I guess I'll have to get a reinforced version 3 mechbox soon too.

April 13th, 2008, 10:10	#1
Colin_S Trader rating Join Date: Jul 2004 Location: Toronto, Ontario	You can break a version 3 mechbox! Heh well this is a first for me and I thought I'd share. Was going to install a set of torque up gears into a friend's TM MP5K when I found this "gem". A clean break (at least on one side) like what you get with version 2 mechboxes... Well I guess that's what you get when you're running a PDI 170% spring and an aluminum piston head... I have a similar setup in my MP5K so I guess I'll have to get a reinforced version 3 mechbox soon too. __________________ Team GHOSTS - Fides et Amicitia Blog: http://www.colinsun.com G-45 Last edited by Colin_S; April 13th, 2008 at 10:21..