Airsoft Canada - View Single Post

oOMuDOo · May 4th, 2008, 00:33

Has anyone ever installed a 9.6 1500 Mah AK stick battery with metal front.

I have a TM AK47s with a G&P metal front-end coupled with a plastic receiver.
I had to file down the inside of the front end of the plastic body where they join.
Or else the battery would not fit inside the opening of the front-end.
I still need to file it down some more to make it easier to insert the battery.

My question is was there any need to modify the plastic battery tray that holds the cocking leaver. I’m unable to make it all fit together.

When the battery is installed in the front end the tray can’t be installed.
When the tray is installed 1st, the battery will not insert into the front-end.

Any ideas would greatly appreciated.

I might post some photos later...

Regards,
Mud

May 4th, 2008, 00:33	#1
oOMuDOo Trader rating Join Date: Apr 2004 Location: Cochrane, AB	AK47s + 9.6v 1500Mah stick battery Has anyone ever installed a 9.6 1500 Mah AK stick battery with metal front. I have a TM AK47s with a G&P metal front-end coupled with a plastic receiver. I had to file down the inside of the front end of the plastic body where they join. Or else the battery would not fit inside the opening of the front-end. I still need to file it down some more to make it easier to insert the battery. My question is was there any need to modify the plastic battery tray that holds the cocking leaver. I’m unable to make it all fit together. When the battery is installed in the front end the tray can’t be installed. When the tray is installed 1st, the battery will not insert into the front-end. Any ideas would greatly appreciated. I might post some photos later... Regards, Mud __________________