|
What's up crunchy?!
What I did was I changed the hop-up rubber and I used a piece of 16 gauge wire strip (no wires inside) as a bucking. (very responsive). Trial and error on how long you need to cut the strip.
You can also place a material in between the original bucking and the cap to close the gap and get the bucking to push further. In Arnie's review he used a piece of plastic packaging.
I also did the glass sealant airtight mod. Currently mine is shooting an average of 390 to 400fps with an m120 spring. No other upgrades and stock batt.
|