Airsoft Canada - View Single Post

Syn · June 8th, 2008, 17:20

ok here:
http://cgi.ebay.com/Micro-Fan-Stealt...742.m153.l1262

US $8.75
specs look pretty good to me especaillly the 15.6 dba level

Specifications:

Size: 25mm square x 10mm thick

Voltage: 12 volts DC

Current: 70mA

Airflow: 1.6 CFM

Weigh: 6.5 grams (.22oz)

RPM: 8000

Noise: 15.6 dB-A

best part is shipping is so low US $2.50 and because it is under $20-25 I doubt I'll get dinged by Customs.

I've been checking out the fan controller by donP (trigger master seller)
http://unconventional-airsoft.com/20...ry-fan-switch/

"The 2200uF capacitor works for my setup and keeps the transistor turned on (and the fan running) for about 10 seconds after I let go of the button. Test with different values to get something you like."

I think I want to experiment with a larger capacitor to make it stay on for 30sec. Anyhow I thought I would share.

I read a few reviews of the already made fan kits but most wont fit my Event goggle and I heard they are loud ~over 20-25dba. the 2.5 cm fan fits exactly on the top of my Event airvent.

June 8th, 2008, 17:20	#1
Syn Trader rating Join Date: Aug 2005 Location: Toronto	Found a source for Goggle fan ebay USPS ok here: http://cgi.ebay.com/Micro-Fan-Stealt...742.m153.l1262 US $8.75 specs look pretty good to me especaillly the 15.6 dba level Specifications: Size: 25mm square x 10mm thick Voltage: 12 volts DC Current: 70mA Airflow: 1.6 CFM Weigh: 6.5 grams (.22oz) RPM: 8000 Noise: 15.6 dB-A best part is shipping is so low US $2.50 and because it is under $20-25 I doubt I'll get dinged by Customs. I've been checking out the fan controller by donP (trigger master seller) http://unconventional-airsoft.com/20...ry-fan-switch/ "The 2200uF capacitor works for my setup and keeps the transistor turned on (and the fan running) for about 10 seconds after I let go of the button. Test with different values to get something you like." I think I want to experiment with a larger capacitor to make it stay on for 30sec. Anyhow I thought I would share. I read a few reviews of the already made fan kits but most wont fit my Event goggle and I heard they are loud ~over 20-25dba. the 2.5 cm fan fits exactly on the top of my Event airvent. __________________ Last edited by Syn; June 8th, 2008 at 17:23..