|
In order:
1- Get new gun
2- Remove all the wires INCLUDING the fuse
3- Replace with high grade silicone wire
4- Install MOSFET
5- Re-shim, clean and regrease/lube the mechbox
6- Have fun!
I did a double battery setup in my G36K.
I simply wired two wires from the front to the rear, with a female plug at front and a male at rear. That way, if I am not using the foregrip battery, I just have to plug wire at the place of the battery and use the stock battery.
Having a double setup can also be made just by having the wires go to both ends. You can leave the fuses there, it does not mather as long as there is no battery connected on BOTH ends at the same time.
|