Airsoft Canada - View Single Post

HaZarD SFD · July 17th, 2008, 22:46

Grimm I would suggest some metal bushings, shimms, to properly shimm the mechbox.. Also you can just buy a 400+ MM barrel and its less cutting and less cost imho. If you have the MP5 SD you can get a barrel that will basically go just too the end of the silencer.

Everything else looks good. The modify head is a great add on.. I have one in my ICS and its taken alot of abuse. I would however suggest a guarder clear rubber instead of that hard type.. Those are mainly made if my thoughts are correct for 400+ AEG's.

Your accuracy will tighten a bit with the 6.03 but range you might get a bit further..

July 17th, 2008, 22:46	#2
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	Grimm I would suggest some metal bushings, shimms, to properly shimm the mechbox.. Also you can just buy a 400+ MM barrel and its less cutting and less cost imho. If you have the MP5 SD you can get a barrel that will basically go just too the end of the silencer. Everything else looks good. The modify head is a great add on.. I have one in my ICS and its taken alot of abuse. I would however suggest a guarder clear rubber instead of that hard type.. Those are mainly made if my thoughts are correct for 400+ AEG's. Your accuracy will tighten a bit with the 6.03 but range you might get a bit further.. __________________ No Comment.