Airsoft Canada - View Single Post

m102404 · July 18th, 2008, 10:38

You're all set...just stick with a 343mm barrel and don't sweat the little bit shorter barrel.

If you're compression is good and your nozzle/hopup seal is good, you should end up around 400fps with 0.20's.

Note, if you go with a M100, you'll be in the high 300 fps and you're trigger response will be better and your ROF will be higher than with a M110. Battery and motor will last longer as well. And no risks that you'll chrony over 400 (don't know your field limits but it's 400 around here).

Best of luck...

July 18th, 2008, 10:38	#9
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	You're all set...just stick with a 343mm barrel and don't sweat the little bit shorter barrel. If you're compression is good and your nozzle/hopup seal is good, you should end up around 400fps with 0.20's. Note, if you go with a M100, you'll be in the high 300 fps and you're trigger response will be better and your ROF will be higher than with a M110. Battery and motor will last longer as well. And no risks that you'll chrony over 400 (don't know your field limits but it's 400 around here). Best of luck...