Airsoft Canada - View Single Post - TM P226

Jerold · July 29th, 2008, 20:42

I've got a TM P226 with a Guarder Full Metal Kit installed. This has never happened before today. When the mag is out of BB's and the slide locks back and I press the slide release, the slide moves forward about .25" and then stops. When I try to manually move the slide forward, it is hitting something that is preventing it from cyclying forward. Also, when I manually move the slide forward, whatever it's hitting also makes the trigger move backward.

My best guess it that it is jamming up against a trigger mechanism (not sure the terminology of this part). In the manual, it's part P226-43. This is the only thing that I can see that the slide is hitting when it's jammed up. I can push it the part down manually to cycle the slide. I'm not really sure why this part (if it is) would go bad.

Part # P226-44 is attached to part 43. Can anyone check to see how much wiggle part 44 has on your gun? Mine has some wobble to it. This part moves forward into a notch on the takedown lever (P226-60). Maybe part 44 is too wobbly and missing the notch...??

BTW, the slide doesn't jam up unless the mag runs out of BB's... (so far).

Thanks in advance.

July 29th, 2008, 20:42	#1
Jerold Trader rating Join Date: Feb 2007	TM P226 - Slide Binding I've got a TM P226 with a Guarder Full Metal Kit installed. This has never happened before today. When the mag is out of BB's and the slide locks back and I press the slide release, the slide moves forward about .25" and then stops. When I try to manually move the slide forward, it is hitting something that is preventing it from cyclying forward. Also, when I manually move the slide forward, whatever it's hitting also makes the trigger move backward. My best guess it that it is jamming up against a trigger mechanism (not sure the terminology of this part). In the manual, it's part P226-43. This is the only thing that I can see that the slide is hitting when it's jammed up. I can push it the part down manually to cycle the slide. I'm not really sure why this part (if it is) would go bad. Part # P226-44 is attached to part 43. Can anyone check to see how much wiggle part 44 has on your gun? Mine has some wobble to it. This part moves forward into a notch on the takedown lever (P226-60). Maybe part 44 is too wobbly and missing the notch...?? BTW, the slide doesn't jam up unless the mag runs out of BB's... (so far). Thanks in advance.