Airsoft Canada - View Single Post

TokyoSeven · August 24th, 2008, 05:41

Its been sitting on my work table for a few weeks now. Havent had time to do anything with it. The plan is to cut off and sand down the plastic where the front grip is and then attach a rail. From there its either going to be a mosquito molds launcher or an M203 short.

No internal modifacation has been made yet, once the external battery mod is in place and complete it should bring the rate of fire up a little. However I dont think I really wish to invest the time or funds into internals for this thing that will most likely explode before I get 2000 rounds out of it.

Something deep down inside me wants to attempt to ram a p90 mechbox in there, but the modifacation required would need scheeming and tech ability out of my league. Im considering some form of folding mp5k stock instead of the full mp5 stock as well.

August 24th, 2008, 05:41	#41
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Its been sitting on my work table for a few weeks now. Havent had time to do anything with it. The plan is to cut off and sand down the plastic where the front grip is and then attach a rail. From there its either going to be a mosquito molds launcher or an M203 short. No internal modifacation has been made yet, once the external battery mod is in place and complete it should bring the rate of fire up a little. However I dont think I really wish to invest the time or funds into internals for this thing that will most likely explode before I get 2000 rounds out of it. Something deep down inside me wants to attempt to ram a p90 mechbox in there, but the modifacation required would need scheeming and tech ability out of my league. Im considering some form of folding mp5k stock instead of the full mp5 stock as well. __________________ "Its only a little bit on fire" Last edited by TokyoSeven; August 24th, 2008 at 05:44..