Airsoft Canada - View Single Post - Custom Kraken build (work log and of course pictures)

byblos · August 28th, 2008, 13:23

im thinking if i make the hole bigger on the cyl. head or make the poles smaller on the mechbox i can fit the cyl head... and maybe shaving down the teeth in the cylinder will allow the spring to reach the end (its getting stuck like 3/4 way in)

August 28th, 2008, 13:23	#11
byblos Trader rating Join Date: Aug 2008 Location: Charlottetown PEI	im thinking if i make the hole bigger on the cyl. head or make the poles smaller on the mechbox i can fit the cyl head... and maybe shaving down the teeth in the cylinder will allow the spring to reach the end (its getting stuck like 3/4 way in) __________________ Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226