Airsoft Canada - View Single Post - WA Kimber Warrior - can't fire -- valve misaligned?

weaselgx · September 7th, 2008, 23:16

Hi guys,

I've lurked on this board for quite a bit and it has been very helpful. Unfortunately, now I have a problem of my own and I can't seem to figure it out.

Anyway, I have a WA Warrior that doesn't fire. The trigger and hammer mechanism appears to be fine. However, when the hammer strikes, nothing happens. The mag is gassed up.

This problem arose when a BB got jammed exiting the magazine lip (due to a new Guarder magazine lip which was a bit tight). I had to rack back the slide, which was somewhat tight, to eject the magazine and clear the BB.

I'd appreciate any help you can give.

Thanks a lot!

September 7th, 2008, 23:16	#1
weaselgx Trader rating Join Date: Sep 2008 Location: New York	WA Kimber Warrior - can't fire -- valve misaligned? Hi guys, I've lurked on this board for quite a bit and it has been very helpful. Unfortunately, now I have a problem of my own and I can't seem to figure it out. Anyway, I have a WA Warrior that doesn't fire. The trigger and hammer mechanism appears to be fine. However, when the hammer strikes, nothing happens. The mag is gassed up. This problem arose when a BB got jammed exiting the magazine lip (due to a new Guarder magazine lip which was a bit tight). I had to rack back the slide, which was somewhat tight, to eject the magazine and clear the BB. I'd appreciate any help you can give. Thanks a lot!