|
Dusti69: I was listing things I tried, both lots of shims and no shims.
Hortons Heros: All of the gears spin perfectly fine when they're in the gearbox by themselves, fully (and properly) shimmed.
m102404: By bind I mean they don't completely stop, it is just really really hard to move the sector gear with my finger. I also thought of the cutoff lever thing and have tried the selector plate in all positions, with no luck. The bushings might not be in properly, as they were a tight fit. I will pop them out and file the mechbox bushing holes and see if that helps.
|