Airsoft Canada - View Single Post

ROF_Madman · September 13th, 2008, 20:13

Hey all,

I just bought an MTHaynes gearbox straight from MTHaynes, because he only had two left, so I jumped on the chance.

I want to bring my gun up from 500fps in my previous setup to about 600fps, which shouldn't be too much of an issue given the strength of both the box and the parts that I think should work out. Thats why I'm here actually. I want to list off my parts and get your opinions. However I don't know what to get when it comes to bushings, piston, and spring and somewhat as to my cylinder setup.

Here it is:

-Mthaynes 6milspec gearbox. Made of aluminum alloy.
-Magnum motor with reinforced guarder thermal treated pinion gear.
-Prometheus Max torque gears
-I think I should get Kanzen ceramic bushings, but im sort of lost.
-Stage 6 airsoft surgeon spring (roughly 630fps) or m185 systema (600fps roughly)
-hurricane metal ball bearing spring guide
-I think a supercore piston would work the best but the max torque gears are meant for half tooth pistons. So I figure that I could just use a dremmel and take of the right side of the teeth when looking at the front of the piston. Unless there is a half tooth piston out there that can handle this fps.
-Systema bore-up kit which includes: Silent piston head, bore up cylinder, bore up cylinder head. Can the silent piston head handle this fps? It has worked great in my 500fps setup but 600fps is a whole differnet league.
-Tappet plate? I haven't the slightest idea. Maybe area 1000?
-systema bore up nozzle. I wanted the compression parts to be all the same company.
-I have a mosfet from extreme fire along with a systema switch assembly and upgraded wiring.
Hopup:
-Neo full metal hopup chamber. I personally think this is the best hopup system on the market. I have tried an ICS, Systema, TM, KWA, and echo 1 hopups and this is by far the best.
-Laylax strike chamber
-Firefly hard bucking
-big out h-nub
-650mm 6.03m tightbore prometheus

I will be getting a 11.1v li-poly and deans connectors.

Please add anything to my list and add any critique you have.

I know a good amount about airsoft and I'm no noob. Don't let my number of posts fool you. I have a 350fps 30rps setup and a 500fps DMR that I built. I know the level of danger and all, but I need your advice when it comes to parts at this level of power.

Thanks in advance.

September 13th, 2008, 20:13	#1
ROF_Madman Trader rating Join Date: Dec 2006 Location: California, United States	600fps, Aeg Project. Hey all, I just bought an MTHaynes gearbox straight from MTHaynes, because he only had two left, so I jumped on the chance. I want to bring my gun up from 500fps in my previous setup to about 600fps, which shouldn't be too much of an issue given the strength of both the box and the parts that I think should work out. Thats why I'm here actually. I want to list off my parts and get your opinions. However I don't know what to get when it comes to bushings, piston, and spring and somewhat as to my cylinder setup. Here it is: -Mthaynes 6milspec gearbox. Made of aluminum alloy. -Magnum motor with reinforced guarder thermal treated pinion gear. -Prometheus Max torque gears -I think I should get Kanzen ceramic bushings, but im sort of lost. -Stage 6 airsoft surgeon spring (roughly 630fps) or m185 systema (600fps roughly) -hurricane metal ball bearing spring guide -I think a supercore piston would work the best but the max torque gears are meant for half tooth pistons. So I figure that I could just use a dremmel and take of the right side of the teeth when looking at the front of the piston. Unless there is a half tooth piston out there that can handle this fps. -Systema bore-up kit which includes: Silent piston head, bore up cylinder, bore up cylinder head. Can the silent piston head handle this fps? It has worked great in my 500fps setup but 600fps is a whole differnet league. -Tappet plate? I haven't the slightest idea. Maybe area 1000? -systema bore up nozzle. I wanted the compression parts to be all the same company. -I have a mosfet from extreme fire along with a systema switch assembly and upgraded wiring. Hopup: -Neo full metal hopup chamber. I personally think this is the best hopup system on the market. I have tried an ICS, Systema, TM, KWA, and echo 1 hopups and this is by far the best. -Laylax strike chamber -Firefly hard bucking -big out h-nub -650mm 6.03m tightbore prometheus I will be getting a 11.1v li-poly and deans connectors. Please add anything to my list and add any critique you have. I know a good amount about airsoft and I'm no noob. Don't let my number of posts fool you. I have a 350fps 30rps setup and a 500fps DMR that I built. I know the level of danger and all, but I need your advice when it comes to parts at this level of power. Thanks in advance.