Airsoft Canada - View Single Post

Tinowyn · September 23rd, 2008, 14:24

Its the same original mag.

Have just taken it all further apart and it is definitely the feed lips (part SC-57) causing the problem, so good call on that earlier!

Not sure how to fix it though, may just buy a new mag and see if that fixes anything. Could always be bent internals though, as a lot of the mechanisms all have their own separate sticking point at that same point in the trigger pull, for some reason.

Edit: Nope turns out its part SC-58, the rubber has become warped over time and it causing too much friction on the various internals, new mag for sure then! (short-term solution, taking a scalpel to the base of the rubber, appears to work)

Thanks for the help!

September 23rd, 2008, 14:24	#7
Tinowyn Trader rating Join Date: Sep 2008	Its the same original mag. Have just taken it all further apart and it is definitely the feed lips (part SC-57) causing the problem, so good call on that earlier! Not sure how to fix it though, may just buy a new mag and see if that fixes anything. Could always be bent internals though, as a lot of the mechanisms all have their own separate sticking point at that same point in the trigger pull, for some reason. Edit: Nope turns out its part SC-58, the rubber has become warped over time and it causing too much friction on the various internals, new mag for sure then! (short-term solution, taking a scalpel to the base of the rubber, appears to work) Thanks for the help! Last edited by Tinowyn; September 23rd, 2008 at 15:00..