Airsoft Canada - View Single Post

BeAcH · October 1st, 2008, 21:28

Thanks for the post to my thread about the HK 416 stock. So since the battery wires go inside the buffer tube, how do you hold the buffer tube onto the gun....because their is that big washer and bolt that you have to screw into the back end of the spring guide in the gearbox. On my gearbox the battery wires comes out about 1.5'' in length and then theirs a tamyia connecter.

So I have to cut that connecter off, splice more wire onto it, slide the wire through the buffer tube and replace with a new tamyia connecter?

Thanks

October 1st, 2008, 21:28	#3
BeAcH Trader rating Join Date: Jun 2008 Location: Fort Saint John BC	Thanks for the post to my thread about the HK 416 stock. So since the battery wires go inside the buffer tube, how do you hold the buffer tube onto the gun....because their is that big washer and bolt that you have to screw into the back end of the spring guide in the gearbox. On my gearbox the battery wires comes out about 1.5'' in length and then theirs a tamyia connecter. So I have to cut that connecter off, splice more wire onto it, slide the wire through the buffer tube and replace with a new tamyia connecter? Thanks __________________ Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers