Quote:
Originally Posted by caboose36
Yes, there is some room to feed the wires through, but I just looked it over, and I remembered what was going wrong. It was a while back when I wanted to do this, so I couldnt remember everything. But what the major problem is, is that I cant get the connector through the barrel nut and the barrel. So do I have to take the connector off of the end of the wire, and the feed it through, or do I need to do some cutting, and soldering?
Thanks guys!
Caboose
|
You won't be able to push through the connector, its designed to only pass a small wire. As you said, either remove the connector and feed, or cut and paste.