Quote:
Originally Posted by HaZarD SFD
Hell I dont even have my glock anymore.. Now I know whats possibly going on with scruffys.
|
It was the edges that I had to file, with how small the part is and how hard the stainless is, it takes some time to round off those edges with a file. Particularly the top edges of the striker, as I note there is some "twist" in the part from the spring that holds it in place. This twist causes just enough list to the part that it tries to cut into the channel, that friction I think is enough that it jams up, with low push back from the stock gas release valves; thus leaving the hammer jammed and the striker down, stopping the slide from recoil and cause gas to vent.
Now to start all the fun of re-greasing and re-sealing all my mags, at least I ordered the valve key this time from UNCompany, so shouldn't take long to get through the 7 of em. Funny enough, my glock broke while having a look at Scruffy's lol.
__________________
_________________________________
"The hydrogen economy car from the people who brought you the '
Hindenburg'" - Glen Foster
Condoms do not guarantee safe sex any more. A friend of mine wore one and was shot by the woman's husband!
