Airsoft Canada - View Single Post - WA Kimber Warrior - can't fire -- valve misaligned?

ClassicBAC · October 28th, 2008, 03:39

I am using WA SVI6 SCW 3 and encounter something similar. I have disassemblied them all out and found that there are two things need to be fixed. From what I have analysed this is what had happened.

The SCW3 firing pin is having a hum comparing to SCW2. The hum seems to hit the sear joint then cause the locking pin (Lock the Firing pin to the hammer) bent.

The locking pin (Lock the Firing pin to the hammer) need to be replaced. I also file the SCW3 firing pin hum about 1 milimeter. They now seem to work properly again.

October 28th, 2008, 03:39	#2
ClassicBAC Trader rating Join Date: Aug 2007	I am using WA SVI6 SCW 3 and encounter something similar. I have disassemblied them all out and found that there are two things need to be fixed. From what I have analysed this is what had happened. The SCW3 firing pin is having a hum comparing to SCW2. The hum seems to hit the sear joint then cause the locking pin (Lock the Firing pin to the hammer) bent. The locking pin (Lock the Firing pin to the hammer) need to be replaced. I also file the SCW3 firing pin hum about 1 milimeter. They now seem to work properly again.