|
Making KWA piston head usable.
Well..
I was about to order a brand new head set for my KWA when I first opened the mechbox.
KWA rifles come with an aluminium piston head... The only problem is that is it not ported!
Easy remedial.
Tools needed:
A Dremel or drill
Fine drill bits
A ruler
First remove the head from the piston and the o-ring from the head.
Then try to divide the piston head in 6-8 even section (they don't have to be perfect. I used a knife to mark the surface very slightlty)
Ruler time! Measure 3mm from the outer edge and mark the drilling spot.
Then simply drill with a small bit. I used a 1mm bit and a 2mm bit to shave the barbs.
Voila!
Improved air seal and no more suction!
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|