Airsoft Canada - View Single Post

TriChrome · November 22nd, 2008, 01:53

I have this gear and did a review of it for my local forum. Using a PDI 190% spring (usually gives me 450 FPS with .2's), 10.8v 4200mah battery, standard ratio other gears, and a TM EG1000 motor I was getting 305 FPS with .2's at 41 RPS.

When I dropped in a Guarder SP170 spring (well over 600 FPS), I was getting around 400 FPS at 34 RPS with a G&P M160 motor. Blew out the 7mm bearings twice and am replacing with 7mm bushings and installing a Systema Magnum motor when they arrive. Should get maybe 37 RPS that way.

I was also sent the new spacer that RiotSC (the manufacturer of this gear) made that makes you get about 70% efficiency out of this setup instead of the 34% that you'll get without a spacer. I'll try that when those other parts arrive.

November 22nd, 2008, 01:53	#14
TriChrome Trader rating Join Date: Aug 2008 Location: New Jersey, USA	I have this gear and did a review of it for my local forum. Using a PDI 190% spring (usually gives me 450 FPS with .2's), 10.8v 4200mah battery, standard ratio other gears, and a TM EG1000 motor I was getting 305 FPS with .2's at 41 RPS. When I dropped in a Guarder SP170 spring (well over 600 FPS), I was getting around 400 FPS at 34 RPS with a G&P M160 motor. Blew out the 7mm bearings twice and am replacing with 7mm bushings and installing a Systema Magnum motor when they arrive. Should get maybe 37 RPS that way. I was also sent the new spacer that RiotSC (the manufacturer of this gear) made that makes you get about 70% efficiency out of this setup instead of the 34% that you'll get without a spacer. I'll try that when those other parts arrive.