Quote:
Originally Posted by beert
TF7 MP7 (i want to get it to around 350 fps)
|
That could prove to be a very difficult and expensive feat.
Essentially you will have to replace almost 100% of all the internals, your best bet is to look into a Brand called "Nine Ball" they are an offshoot from Laylax. If you can source a location to purchase the parts then your good to go. Another factor you will have to consider is power supply, you will require a bit more power than what the standard AEP battery provides, you will most likely have to convert to an external battery set up with an AN/PEQ or some other form of external battery housing.
Even after all that, I still believe 350 feet per second is a huge stretch for an AEP mechbox, dont get me wrong. Im sure it has been done before, but how long did it last and how reliable was it? Personally I would aim for about 300-310FPS.
Good luck.