Airsoft Canada - View Single Post

Sim123456 · December 1st, 2008, 09:55

Hi guys, just to let you know that I finished assembling and testing my new cylinder/trigger set up:

Laylax teflon cylinder
Laylax 7/9mm spring guide
Laylax 170% 9mm spring Edit: Now PDI SS 5000
Laylax 3 elements high pressure piston
Laylax power accuracy cup
Laylax tapper cylinder head
PDI Hop Up
Firefly hard bucking
PDI 6.01mm thight bore inner barrel 650mm long (PSG-1 long)

Laylax Zero triger

I used silicone oil for lubbing but I'm thinking it will need more lubing than going with silicone grease? Edit: Now using lithium grease for the assembly.

The assembly is very easy on a Type 96. The spring is harder on the arm and the cylinder is shaking when the pressure air is release. A big clang now, no more little "click" when shooting. The zero trigger is a charm, so smooth on the touch, very nice, but for the price tag, it is normal.

First shot was on the bottom of a Red Rave can, but I found out that the can being smaller, the bottom is very thicker and my bb exploded more than anything. On target shooting, you can say that the gun is very stronger than stock (maybe aroun 550fps now). Accuracy is pretty bad because of the stock inner barrel and stock spacer. A longer tight bore inner barrel will follow when cash wil allow, with a pdi hop up. Edit: Both upgrades now installed.

Now the gun cost 750$, compare to 350$. 1000$ will be hit pretty soon. Edit: Past 1000$ now.

http://ca.youtube.com/watch?v=NAlJuXYLQO8

December 1st, 2008, 09:55	#1
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	TSD type 96 upgrades done Hi guys, just to let you know that I finished assembling and testing my new cylinder/trigger set up: Laylax teflon cylinder Laylax 7/9mm spring guide Laylax 170% 9mm spring Edit: Now PDI SS 5000 Laylax 3 elements high pressure piston Laylax power accuracy cup Laylax tapper cylinder head PDI Hop Up Firefly hard bucking PDI 6.01mm thight bore inner barrel 650mm long (PSG-1 long) Laylax Zero triger I used silicone oil for lubbing but I'm thinking it will need more lubing than going with silicone grease? Edit: Now using lithium grease for the assembly. The assembly is very easy on a Type 96. The spring is harder on the arm and the cylinder is shaking when the pressure air is release. A big clang now, no more little "click" when shooting. The zero trigger is a charm, so smooth on the touch, very nice, but for the price tag, it is normal. First shot was on the bottom of a Red Rave can, but I found out that the can being smaller, the bottom is very thicker and my bb exploded more than anything. On target shooting, you can say that the gun is very stronger than stock (maybe aroun 550fps now). Accuracy is pretty bad because of the stock inner barrel and stock spacer. A longer tight bore inner barrel will follow when cash wil allow, with a pdi hop up. Edit: Both upgrades now installed. Now the gun cost 750$, compare to 350$. 1000$ will be hit pretty soon. Edit: Past 1000$ now. http://ca.youtube.com/watch?v=NAlJuXYLQO8 Last edited by Sim123456; January 16th, 2009 at 08:34..