Please only Hi-capa experience users answer
Basic Info
2nd Owner - TM Hicapa Purchased from Kamatokai
2nd Owner - Metal Slide Springfield Armoury Purchased from Tomolok
How my problem happened
1. Got a Metal slide from Tomolok, but the Blowback unit didn't seem to fit flush so I cannot put the metal slide in without it getting stuck right away, but the slide fits without the internals
2. So the metal slide does not fit in with all the internals in so I transfer the Tm internals back into stock plastic slide
3. When firing the Loading muzzle keeps getting stuck, shoots one BB but does not retract properly, the spring is slightly bent
4. The loading muzzle when I pull it to test once in awhile it goes back slowly as if there is a lot of sticky material
5. Need new muzzle and blowback unit?
Quick Summary
- Gun was working before trying to transfer internals into metal slide
- The metal slide is Springfield that was once fitted on a 1911, was told that the slide would fit on a hi-capa but it does not
- Mags are fine no problem
- Loading muzzle keeps getting stuck forward and must be pushed by hand to get it back into starting position