Airsoft Canada - View Single Post

[]D[][]\/[][]D · December 24th, 2008, 23:01

I just received my Systema N-B Cylinder Type 1, my Prometheus Air Seal Nozzle and my Prometheus MS110SP Spring and just installed it in my otherwise stock gearbox. I'm planning on getting a cylinder head, piston head with bearing, piston and spring guide with bearing somtime after Xmas. But I just wanted to see if my gearbox still works, so I pluged in my 8.4V 1600mAh mini battery and pulled the trigger. Nothing happens when I pull the trigger, but the motor turns with no problem when not connected to the gearbox. So I know that it isn't an electrical issue but a gearbox issue. But what could it be? I didn't touch anything else except around the cylinder and spring area and I had no issues closing the gearbox afterwards.

December 24th, 2008, 23:01	#1
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	TM SIG SG 552 Not Working I just received my Systema N-B Cylinder Type 1, my Prometheus Air Seal Nozzle and my Prometheus MS110SP Spring and just installed it in my otherwise stock gearbox. I'm planning on getting a cylinder head, piston head with bearing, piston and spring guide with bearing somtime after Xmas. But I just wanted to see if my gearbox still works, so I pluged in my 8.4V 1600mAh mini battery and pulled the trigger. Nothing happens when I pull the trigger, but the motor turns with no problem when not connected to the gearbox. So I know that it isn't an electrical issue but a gearbox issue. But what could it be? I didn't touch anything else except around the cylinder and spring area and I had no issues closing the gearbox afterwards.
$[]D[][]\/[][]D is offline$