Airsoft Canada - View Single Post

Roughneck · January 6th, 2009, 14:54

They're a tight fit, but they'll go in. Dremel is your friend to make sure they slide out smoothly when you need a quick reload. I trimmed a bit off the lips (where they come together around the shell) and I also removed some plastic in the actual shell holder to make sure they fit in there properly. Just don't take out too much or they'll be loose, obviously.

Side note, when you put the shells with the primer down (as in my picture above).. they're real quick to refill with bb's using a speed loader.

January 6th, 2009, 14:54	#7
Roughneck used to be Spencer aka Sue Trader rating Join Date: Oct 2007 Location: Halifax, NS	They're a tight fit, but they'll go in. Dremel is your friend to make sure they slide out smoothly when you need a quick reload. I trimmed a bit off the lips (where they come together around the shell) and I also removed some plastic in the actual shell holder to make sure they fit in there properly. Just don't take out too much or they'll be loose, obviously. Side note, when you put the shells with the primer down (as in my picture above).. they're real quick to refill with bb's using a speed loader. __________________ Tpr. Spencer, DF RCD C Sqn - CFB Gagetown Please save for me, some gallantry That will echo when I'm gone Last edited by Roughneck; January 6th, 2009 at 14:58..