Airsoft Canada - View Single Post - Hi-Capa 4.3 : Creation Outer Barrel Compatibility with PGC slide

jaoquinz · January 7th, 2009, 22:08

Hi guys,

Well I spent about 3 hours affixing a piece of nylon strip along the edge of the damaged area and epoxied it carefully then sanding it down to the right profile. A bit like car metalwork with bondo. When I was satisfied with that I reassembled the slide, racked it once and POP the new addition piece snapped off. Haha there goes one idea.

So still in the market for a compensator. I tried to see if the threads on the muzzle end of Creation outer barrel works, and I screwed the SD chamber onto it, and it works. So I'm wonder if the thread size on SD compensators are the same as their chambers. If so that means most SD compensators would attach onto the Creation outer barrel.

Also, I was wondering how a compensator is attached and how it sits when it is attached. I'm asking this because the outer barrel comes out of the front end of the slide by about 2mms, and I'm wondering if a compwould sit flush with the slide when attached. Because if it doesn't, then it defeats the purpose for me wanting it to be another impact point to bring the chamber up to battery. Anyone knows this?

January 7th, 2009, 22:08	#34
jaoquinz Trader rating Join Date: Dec 2008 Location: Hong Kong	Hi guys, Well I spent about 3 hours affixing a piece of nylon strip along the edge of the damaged area and epoxied it carefully then sanding it down to the right profile. A bit like car metalwork with bondo. When I was satisfied with that I reassembled the slide, racked it once and POP the new addition piece snapped off. Haha there goes one idea. So still in the market for a compensator. I tried to see if the threads on the muzzle end of Creation outer barrel works, and I screwed the SD chamber onto it, and it works. So I'm wonder if the thread size on SD compensators are the same as their chambers. If so that means most SD compensators would attach onto the Creation outer barrel. Also, I was wondering how a compensator is attached and how it sits when it is attached. I'm asking this because the outer barrel comes out of the front end of the slide by about 2mms, and I'm wondering if a compwould sit flush with the slide when attached. Because if it doesn't, then it defeats the purpose for me wanting it to be another impact point to bring the chamber up to battery. Anyone knows this?