Airsoft Canada - View Single Post - Hi-Capa 4.3 : Creation Outer Barrel Compatibility with PGC slide

jaoquinz · January 12th, 2009, 13:50

Hi Madmax!

Thanks for dropping by!

Well I figured that silver was a little too soft, but it was either silver or steel rings. What would be the best? Alumnium I suppose? How did your setup go?

An o-ring might be a little thick, but I'll try it first. Might stick a tiny strip of foam behind the ring to see how that works out.

I'll report back on the deformation of the ring when it happens.

January 12th, 2009, 13:50	#41
jaoquinz Trader rating Join Date: Dec 2008 Location: Hong Kong	Hi Madmax! Thanks for dropping by! Well I figured that silver was a little too soft, but it was either silver or steel rings. What would be the best? Alumnium I suppose? How did your setup go? An o-ring might be a little thick, but I'll try it first. Might stick a tiny strip of foam behind the ring to see how that works out. I'll report back on the deformation of the ring when it happens.