|
90% of the pistols I've built are perfectly fine with steel chambers, even when the slide was soft die-casted zinc-aluminum.
You got burned on your deal. :P
As for fixing the ring on, a grub screw triangle should work well. Would recommend centre-punching or drill tipping in to the outer barrel where the grub screw would affix to to give a detent for the grub screw to grab on to. Secure with loctite, to make sure the grub screw doesn't back out.
@ Lanny, again, the PDI compensator solution is useless for the OPs needs. He needs his OUTER BARREL to have the compensator attached, not the inner barrel.
PS... Hong Kong was an English colony for 100 years. It's not surprising that the residents there can speak English when it was an official second language and taught in schools through a better part of the 20th century.
|