|
The ones you listed should work, they just need to be bent at 45' so they fit on the motor.
Also your cylinder broke a tooth? You mean your piston? I have never really used stock ICS nylon pistons for any length of time so I can't comment on their reliability.
As for the gun not firing on semi and blowing fuses on auto, sounds like what happened to me. It is actually similar to why PTW's blow fuses. The motor adjustment screw is loose and actually tightens as you fire, seizing the mechbox. You need to loctite it in place (medium strength so you can still adjust it later, I think its the blue one) so it doesn't move while firing. Also I always remove the fuses from my guns as they are more hassle than anything. As long as you know not to hold down the trigger when the mechbox isn't cycling, the fuse has no purpose.
On another note, one of the "never lost" pins fell out of my gun when I was swapping the spring. Its a crappy little clip that keeps the pin from falling out of the receiver, its nothing like the slick system in PTW's for the pins to not fall out. It doesn't really matter since its held in so tight, just make sure not to loose em when adjusting things.
Installed a Modify Ms110 spring at the minimum strength spring guide position and now mine is shooting 380-390fps with BB Bastard 0.20's.
|