Airsoft Canada - View Single Post

sushicake · February 1st, 2009, 19:09

Ok I'm having issues with my P226's magazine.

I was firing off today and after a few quick consecutive shots the valve in the magazine got stuck, and spewed all the gas out converting my poor P226 into full auto for a quick second or two.

I took the valve out relubed it, then put it back in. And I noticed that the valve was sticking out a bit more than it was suppose too...

I dont know if this is suppose to be the length of it or if it's damaged or not. But now after firing off about 15 shots the valve gets stuck again, and causes me to take the whole magazine apart.

please help =[

It could be one of the O-Rings inside are blown, cause I notice everytime I take the mag apart one of O-rings gets kinda stuck inside.

February 1st, 2009, 19:09	#1
sushicake Trader rating Join Date: Dec 2008 Location: Markham, ON	TM P226 Magazine issues... Ok I'm having issues with my P226's magazine. I was firing off today and after a few quick consecutive shots the valve in the magazine got stuck, and spewed all the gas out converting my poor P226 into full auto for a quick second or two. I took the valve out relubed it, then put it back in. And I noticed that the valve was sticking out a bit more than it was suppose too... I dont know if this is suppose to be the length of it or if it's damaged or not. But now after firing off about 15 shots the valve gets stuck again, and causes me to take the whole magazine apart. please help =[ It could be one of the O-Rings inside are blown, cause I notice everytime I take the mag apart one of O-rings gets kinda stuck inside. __________________ "Don't you know the first law of physics? Anything fun costs atleast $8" Last edited by sushicake; February 15th, 2009 at 22:06..