Airsoft Canada - View Single Post - Bore-Up Cylinder Set

ILLusion · February 2nd, 2009, 17:03

So then get that guarder set and find a bore up cylinder set that's unported. They are available individually, possibly by other manufacturers. You'll just have to look around.

Maybe the Guarder cylinder isn't designed with walls as thin as Systema... I don't know. I've never used the Guarder one, so I couldn't say. Where does it say it's 451-550mm?

I've successfully used full unported cylinders in plenty of 590mm guns with no difference in performance. Swapping in bore up cylinder sets also provided no difference.

Granted, all of these builds used tight bore inner barrels, which would require less air volume than a full 6.08mm bore.

February 2nd, 2009, 17:03	#4
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	So then get that guarder set and find a bore up cylinder set that's unported. They are available individually, possibly by other manufacturers. You'll just have to look around. Maybe the Guarder cylinder isn't designed with walls as thin as Systema... I don't know. I've never used the Guarder one, so I couldn't say. Where does it say it's 451-550mm? I've successfully used full unported cylinders in plenty of 590mm guns with no difference in performance. Swapping in bore up cylinder sets also provided no difference. Granted, all of these builds used tight bore inner barrels, which would require less air volume than a full 6.08mm bore. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; February 2nd, 2009 at 17:06..