Airsoft Canada - View Single Post - Double Feed/Mag Dumping Issue

milehigh · February 10th, 2009, 15:24

There is no gear timing. It sounds like your problem might be from the hop-up letting too many BB's through at once. On a lot of upgrade guns, the gearset tends to carry some momentum after each shot, therefor keeping the nozzle pulled back slightly. If your hop-up rubber is working properly, only 1 BB should sit in the chamber. It is not really the job of the nozzle to block the BB's.

Try Turning your hop-up all the way up. This might block extra BB's from coming through. If it doesnt double feed when you do this, then you know what the problem is.

February 10th, 2009, 15:24	#7
milehigh Trader rating Join Date: Dec 2006 Location: Victoria	There is no gear timing. It sounds like your problem might be from the hop-up letting too many BB's through at once. On a lot of upgrade guns, the gearset tends to carry some momentum after each shot, therefor keeping the nozzle pulled back slightly. If your hop-up rubber is working properly, only 1 BB should sit in the chamber. It is not really the job of the nozzle to block the BB's. Try Turning your hop-up all the way up. This might block extra BB's from coming through. If it doesnt double feed when you do this, then you know what the problem is. Last edited by milehigh; February 10th, 2009 at 15:28..