Airsoft Canada - View Single Post

Sneaky · February 11th, 2009, 20:52

Hi, i have sent my gun to an Airsmith at Airsoftgi and after the long wait (1 month) i called them and when asking them how my gun was they told my gears were warped. I sent the gun in with an electrical, hop up, and tappet plate issue so this is shocking news to me. It only becomes more shocking to me because i have a set or Classic Army Helica Super Toque up Gears in the gun and havent been pulling anything above an m120 or 400fps rated spring for no more than a few thousand rounds. How would the gears get warped inside the gearbox? the gun has also seen no variation as i keep it in a heated basement and only used it during the summer and fall. The gun is a classic army sl-8 with a V3 7mm gearbox. Any help would be apprieciated.

February 11th, 2009, 20:52	#1
Sneaky Trader rating Join Date: Aug 2008	Warped Gearset Hi, i have sent my gun to an Airsmith at Airsoftgi and after the long wait (1 month) i called them and when asking them how my gun was they told my gears were warped. I sent the gun in with an electrical, hop up, and tappet plate issue so this is shocking news to me. It only becomes more shocking to me because i have a set or Classic Army Helica Super Toque up Gears in the gun and havent been pulling anything above an m120 or 400fps rated spring for no more than a few thousand rounds. How would the gears get warped inside the gearbox? the gun has also seen no variation as i keep it in a heated basement and only used it during the summer and fall. The gun is a classic army sl-8 with a V3 7mm gearbox. Any help would be apprieciated.