|
14AWG wire will be a very tight fit in the mechbox...depends on the thickness of the insulation I suppose.
EG1000 will work fine, Guarder Infinite or better motors are gravy. Use a large battery with good cells (i.e. Intellect, GP, Sanyo, etc...). Swap in DEANs connectors. With a rear stock setup on an MP5...consider just simply soldering on the extension or if you're running new wire...minimize any in-between connections.
So many plain old brass cylinders work so well...that I've never felt the need to use teflon/chrome cylinders...but it's up to you.
Swap the hopup rubber and nub as well...tightbore barrels are optional on an MP5 (at least I personally wouldn't bother...but lots of guys put them in anyways).
|